99.95% 99% Nickel Plated Copper Plate Sheet JIS C1020 C1100 C1201 C1220 EN GB
A 99.95% or 99% nickel-plated copper plate sheet refers to a copper sheet that has been coated with a layer of nickel, typically with a purity of 99.95% or 99%. Here's a breakdown of their key features and properties:
Material: The base material of the plate sheet is copper, which provides excellent electrical and thermal conductivity. Copper is also known for its corrosion resistance and antimicrobial properties.
Nickel Plating: The copper plate sheet has been coated with a layer of nickel through a plating process. Nickel plating offers several advantages, including enhanced corrosion resistance, improved wear resistance, and increased hardness. It can also provide an attractive appearance and a smooth surface finish.
Nickel Purity: The nickel used for plating can have a purity of 99.95% or 99%, depending on the specific requirements of the application. A higher purity level generally indicates better quality and improved performance.
Applications: Nickel-plated copper plate sheets find applications in various industries, including electronics, telecommunications, automotive, aerospace, and decorative purposes. The combination of copper's conductivity and nickel's properties makes these sheets suitable for electrical contacts, connectors, circuit boards, heat sinks, and other components where good electrical and thermal conductivity, corrosion resistance, and durability are required.
It's important to note that the given description assumes standard industry practices for nickel-plated copper plate sheets. Actual specifications may vary depending on the manufacturer and specific product requirements, such as dimensions, thickness, nickel coating thickness, and tolerances of the sheets.
Brass: A copper alloy with zinc as the main added element, with an aesthetic yellow color, collectively known as brass. Copper-zinc binary alloys are called ordinary brass or simple brass. Brass above ternary is called special brass or complex brass. Brass alloys containing less than 36% zinc are composed of solid solutions and have good cold working properties , such as brass containing 30% zinc is commonly used to make cartridge cases , commonly known as cartridge case brass or seven-three brass. Brass alloys containing zinc between 36~42% are composed of solid solutions, of which the most commonly used is 64 brass containing 40% zinc. In order to improve the performance of ordinary brass, other elements are often added, such as aluminum, nickel, manganese, tin, silicon, lead, etc. Aluminum can improve the strength, hardness and corrosion resistance of brass, but reduce plasticity, suitable for sea wheel condenser pipe and other corrosion-resistant parts. Tin can improve the strength of brass and corrosion resistance to seawater, so it is called naval brass, which is used as ship thermal equipment and propellers. Lead can improve the cutting performance of brass; This free-cutting brass is often used as a watch part. Brass castings are commonly used to make valves and pipe fittings.
Plain brass: It is an alloy composed of copper and zinc. When the zinc content is less than 39%, zinc can be dissolved in copper to form a single-phase a, called single-phase brass, with good plasticity, suitable for hot and cold pressure processing. When the zinc content is greater than 39%, there is a single-phase and a solid solution based on copper and zinc, called duplex brass, b makes the plasticity small and the tensile strength increases, only suitable for thermal pressure processing. If the mass fraction of zinc continues to increase, the tensile strength decreases and has no use value. The code is indicated by "H + number", H for brass, and the number for the mass fraction of copper. For example, H68 indicates a brass with a copper content of 68% and a zinc content of 32%, and cast brass is a cast brass with a "Z" before the code, such as ZH62 such as Zcuzn38 indicates a cast brass with a zinc content of 38% and a margin of copper. H90, H80 single-phase, golden yellow, so there is gold co-called, called plating, ornaments, medals, etc. H68 and H59 belong to duplex brass, which are widely used in structural parts on electrical appliances, such as bolts, nuts, washers, springs, etc. In general, single-phase brass for cold deformation processing Duplex brass for hot deformation processing.
Special brass: A multi-alloy composed of adding other alloying elements to ordinary brass is called brass. The elements often added are lead, tin, aluminum, etc., which can be called lead brass, tin brass, aluminum brass. The purpose of adding alloying elements. It is mainly to improve the tensile strength and improve the processability. Codename: "H + Main Canadian Dollar."
Our advantage
| FLEXIBILITY | MISSION | QUALITY | SERVICE | STABILITY |
| MOQ only 200KG, Sheet/Coil | Being your trusted steel expert | 100% quality guarantee, supporting the third-party inspection | Fast Response, Fast shipping & Fast delivery Well-appointed machining equipments, Own logistics | Long-term & stable material Inventory, Wide variety of material types & specifications |
Product Inventory
Jiangsu Jinruiheng uses standard export transportation packaging, according to the size of the stainless steel plate binding steel belt. According to our shipping experience, a 20-foot container can hold 22 tons of stainless steel, and a 40-foot container can hold 25 tons of stainless steel. For larger orders, we ship by bulk carrier, which is cheaper. Packaging can also be customized according to customer needs.
Packing and Shipping:
DELIVERY SERVICE COMMITMENT:
The goods shall be delivered in strict accordance with the contract, and the consignee shall be notified within 48 hours after thegoods are delvered: Loading shall be carried out in strict accordance with the requlations. without overloading, bias and weiahtgathering
